返回首頁
 
[ 一般理化儀器 | 個人型離子風扇 ]
Typical usage
Electronics assembly and factory personal
•The CAS-10WC Compact Ionizer neutralizes both the human body and the maerial which static charges are to be eliminated ,removing the static damage.Free from list bands and earth cables.

Clean room
•Cleaning away earth cables,it can neutralize the static charges generated from the factory personnel going around and remove electrostatically bonded particulate from surfaces.
IC and other electronic parts
•Protects active workers and electrostatically charged components.
FRP and plastic bonding
•Promotes safety management by controlling static related contamination.

(1) All the time controls the static electricity by suspending around the neck.The CAS-10WC Compact Ionizer neutralizes the operator and the material which static charges are to be eliminated,removing the electrostatic damage.
(2) Useage desk-size:You can install this Ionizer on the desk as a private item.
(3) Our original "TAIBS" system controls the ion balance automatically in any busy condition.

(4) Eliminates the electrostaic,preventing fire caused by the static spark.

(5) Makes list bands and earth cables redundant.

(6) Clears away the earth cable?No more electric hazard!

Spec.
Description
Wearable compact ionlizer
Operating state

Two wearable types and one stationary type
(1)Wearable type for the human body and materials
  Wearable for the neutralizing of the human body and
  materials
(2)Wearable type only for the human body
  Wearable only for the neutralizing of the human body
(3)Stationary type
  Attach to the stay or set on the desk

System
Direct current,corona discharge(±bipolar)
Effective area
Total active distance 50mm~500mm
Active ionization surface 600mm x 600mm
Ozonometry
Positive pole discharge needle:less than 0.05PPM
Negative pole discharge needle:less than 0.20PPM
*measured at a distance of 10mm from the needle.
Notice of battery replacement
Alarm
Display of operating state
LED flashing on and off when ions are discharged.
Mode

'HIGH' and 'LOW'
The machine starts in the initial mode to eliminate theexisting electrostatic at full capacity for thirty minutes.
(1) 'HIGH' mode:Powerful operation to control
  muchelectrostatics.Operating time using the battery is
   about aweek.
(2) 'LOW' mode:Operation to control slight   electrostatics,Operating time using the battery is about
   amonth.

Usage
(1) Wearing
   Suspend the machine around the neck with a strap and fix
   it totheclothes with chips or pins.
   (a)For the body and materials:turning down the
      discharging holes.
   (b)For the body:turning up the discharging holes.
(2) Putting on the desk
  Install on a level desk
(3) Setting in the air
  Screw up the device through the two mounting holes of
   the handle.
Needle cleaning system
Equipped with the needle cleaning mechanism(bursh)
Needle's life
About 3 years (6000 hours)
Operating time
Operation for 8 hours a day,20 days a month usingalkaline cells
(1)'LOW' mode:About a month
(2)'HIGH' mode:About a week
Power consumption
(1)'LOW' mode:36mW
(2)'HIGH' mode:108mW
Power supply
6P type battery(alkaline cell recommended)
Dimension
64.4mmW x 75.1mmH x 44.1mmD
Weight
85g
Operating temperature and humidity
0~45℃,35~85%RH
Standard accessories
Battery(alkaline cell:6P type)、
Strap Table clamp(safety pins and others)
Operational accessories
Dummy battery、AC adaptor、Secondary battery pack、Secondary battery charger
   
 
Copyright © 2004 Power Assist Instrument Scientific Corp. All Right Reserved 
update: 2017-10-19