返回首頁
 
[ 光源組 | CCS | PFB-20SW-F-JT ]

■ LED光源 LED Light Sources

  
The PFB-20SW Series Possesses A Variety Of Features.

PFB2
■ PFB-20SW-F-JT
 
Feature：
  • Achieves illumination of approximately 170,000 lx*1.
  • Compact, with a width of 70 mm, a depth of 150 mm, and a height of 100 mm*2.
  • Features an LED light source with a long lifetime of 25,000 hours.
  • Contributes to global environmental conservation through its energy-saving performance.
  • Provides high reliability with stable brightness.
  • 1: Actual value observed 50 mm from the end of the fiber when the light intensity control is set at 100% and a?straight light guide with a joint diameter of 8 mm is attached. (Reference value)?.
  • 2: Calculated value until the light output decreases to 70% at a light intensity of 100% and an ambient temperature?of 25Co. (Value not guaranteed)

 
Specification :
Product name HYPER LED Light Source
Model PFB-20SW-F-xx/PFB-20SW-F-JT-xx
LED color White
Relative color temperature (typ.) 6,500K
Lighting method Constant lighting
Drive method Constant-current system
Light intensity control method Variable current control
Light intensity control Standard Type Continuous control using the intensity control knob
External Control Type

Manual:Continuous control using the intensity control knob Remote:256-step light intensity via RS-232C communications command by using the Remote/Manual switch on the front panel.
ON/OFF control Standard Type None
External Control Type RS-232C communications command
External control terminal
Error detection An error indicator lamp on the front panel flashes (0.5 sec) and output stops
<Error details> ·LED open failure detected ·LED abnormal temperature detected ·Fan shutdown detected ·Microcontroller oscillator shutdown detected (1 second flashing).
Error detection output Standard Type None
External Control Type The RS-232C communications command returns error command
Note: In the case of a microcontroller oscillator shutdown error, communications are not possible, so the only indicator is the flashing lamp.
Input protection Fuse (2.2 A/30 V)
Input voltage (rated) 24V DC
Input voltage (range) 21.6 to 26.4V DC
Power consumption (typ.) 20W
External control Standard Type None
External Control Type Light intensity control via RS-232C communications,
ON/OFF control ON/OFF control using the ON/OFF terminal.
Insulation resistance voltage (input-FG) Insulation resistance: 500V DC, 1 MΩ min.
Withstanding voltage: 250V AC for one minute, cutoff current: 10 mA max.
Operating environment Temperature: 0 to 40°C, Humidity: 25 to 85% RH (No condensation).
Storage environment Temperature: -20 to 60°C, Humidity: 20 to 85% RH (No condensation).
Cooling method Forced air cooling, Intake vents: sides, Exhaust vents: rear.
Material, coating, surface processing
  Case Front and rear panels
Surface processing Black alumite -
Material Aluminum ABS resin

Weight 1200g
Notes: The illumination and lifetime values are not guaranteed; they are for reference only.
Plastic fiber deteriorates due to the short wavelength LED (blue). When using plastic fiber, consult the manufacturer.
Please do not place anything within 50 mm of the fan exhaust outlet of the rear panel, the fan air inlets of the side panels, or the top panel.
顯
   
 
Copyright © 2004 Power Assist Instrument Scientific Corp. All Right Reserved 
update： 2020-03-27